DOEL Swimming Pool Heater Above Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This doel swimming pool heater above review covers the DOEL 44000 BTU Inverter Pool Heat Pump. It is a dual-mode unit for heating and cooling pools up to 9,000 gallons. The system uses a full DC inverter compressor to deliver consistent temperatures. Its maximum COP rating is 15.8, indicating high energy efficiency. You get WiFi connectivity for remote control via a mobile app. The unit operates in ambient temperatures from 5℉ to 109.4℉. It supports both fresh and salt water pools. This model is designed for year-round use with auto-defrost capabilities. It integrates easily with various pool plumbing systems.
What stands out
- 44000 BTU heating capacity for pools up to 9,000 gallons
- Maximum COP of 15.8 with full DC inverter technology
- WiFi smart app control for scheduling and monitoring
- Dual heating and cooling modes within specified ranges
- 53dB noise level at 1-meter distance
Who it fits
Good fit for
You should consider this heat pump if you have a pool up to 9,000 gallons and want precise temperature control. The high COP rating makes it suitable for owners seeking energy efficiency in chilly climates. The dual heating and cooling modes benefit those who swim in varying seasons. If you prefer managing settings remotely via an app, the WiFi feature is a strong match. The unit also works well for salt water pools, expanding its compatibility for diverse setups.
Who should skip it
You might want to look elsewhere if your pool exceeds 9,000 gallons, as this unit is not rated for larger volumes. If you need a dedicated gas heater for rapid heating in extreme cold, the heat pump’s ambient range limits may not suffice. The unit requires lightning protection measures, which adds complexity for some installations. Additionally, if you prefer a completely silent operation without any mechanical noise, the 53dB output might be noticeable. The physical dimensions also require adequate space for installation.
Verdict: This heat pump offers efficient heating and cooling for medium-sized pools with smart connectivity. Its high COP rating supports energy-conscious users seeking stable water temperatures.
Key specs explained
Heating Capacity: 44000 BTU
This rating indicates the unit moves 44,000 British Thermal Units of heat per hour. You get faster water warming compared to lower-output models. This power level suits larger pools up to 9,000 gallons. It helps maintain temperature in cooler climates. When shopping, compare this against smaller 20,000 BTU units for your specific pool volume.
COP Rating: 15.8
Coefficient of Performance measures energy efficiency. A 15.8 rating means the unit delivers 15.8 units of heat for every unit of electricity used. This is significantly higher than traditional gas heaters. You save on operating costs over time. Look for high COP values when comparing heat pumps for long-term savings.
Compressor Technology: Full DC Inverter
This technology adjusts the compressor speed to match your heating needs. It avoids the energy spikes of on-off cycling found in non-inverter models. You enjoy more stable water temperatures and quieter operation. The unit runs efficiently at partial loads. Check for DC inverter specs to ensure consistent performance and lower electricity bills.
Connectivity: WiFi, mobile app
You can control the heater remotely via a smartphone application. Set schedules, adjust temperatures, and monitor energy usage from anywhere. This convenience allows you to heat the pool before you arrive. It replaces the need to manually adjust the panel. Compare this feature with basic models that lack remote access capabilities.
Operational Modes: Heating and cooling
The unit functions as both a heater and an air conditioner for your pool. You can lower water temperatures during hot summer months. This dual capability extends the swimming season in both directions. You get two functions in one device. When comparing, ensure you need cooling for your climate and pool usage patterns.
Design and build overview
The listing specifies an ABS casing that resists aging. This material choice protects the unit from long-term outdoor sun and rain exposure. You do not need to worry about the shell degrading quickly in harsh weather. However, the listing notes that lightning protection measures are required. You should plan your installation site with this safety requirement in mind.
According to the listing, the unit measures 14 feet by 23 feet by 48 inches. This footprint is substantial. You need a flat, stable area near your pool to accommodate these dimensions. The height of 48 inches keeps the controls accessible without requiring you to bend down excessively. The unit weighs enough to stay in place, but you should ensure the ground can support its mass.
The front features an LCD touch panel. This layout allows you to adjust settings directly on the device. You can switch between heating and cooling modes or set schedules without leaving your poolside. The IPX4 waterproof rating means the internal electronics are protected against water splashes from any direction. This design supports outdoor use in light rain, provided the area is sheltered from direct downpours. The quiet operation at 53dB ensures the build does not disrupt your relaxation.
Setup and everyday use
Setup involves connecting the unit to your pool’s plumbing. The listing provides three connection options to ensure compatibility. You can use a 1.25-inch or 1.5-inch hose adapter, a 1.5-inch adapter conversion kit, or a 1.5-inch PVC pipe converter. This variety helps you integrate the heater with existing pool systems without complex modifications. The unit measures 14 feet by 23 feet by 48 inches, so you need adequate space for installation and airflow. Daily use is managed through an onboard LCD touch panel or a mobile app. You can adjust the target water temperature, set custom on and off schedules, and switch between heating and cooling modes remotely. The app also displays real-time energy usage and operating parameters. The heating range is 47 to 104 degrees Fahrenheit, while the cooling range is 47 to 83 degrees Fahrenheit. The system operates in ambient temperatures from 5 to 109.4 degrees Fahrenheit. An auto-defrost system activates in low-temperature conditions to maintain performance. The unit produces 53 decibels of noise at one meter, which allows for quiet operation. Safety features include water-electric separation, electric leakage protection, and anti-freeze protection. You should fully drain the unit in winter to prevent pipe cracking. The IPX4 waterproof rating protects against rain, but lightning protection measures are required. The full DC inverter compressor ensures stable heating while consuming less energy than traditional gas heaters.
Before you buy this unit
You need to verify your pool volume does not exceed 9,000 gallons. This limit applies to both fresh and salt water systems. Check your local climate data. The unit operates between 5℉ and 109.4℉. It may struggle in extreme cold outside this range. Confirm you have a dedicated electrical circuit. The listing mentions leakage protection but does not specify amperage. You must install lightning protection measures for outdoor safety. Plan for winter drainage. You need to fully drain the unit to prevent pipe cracking. Consider the 48-inch height for your poolside layout. This model fits well if you want dual heating and cooling. It suits those who want smart controls via WiFi. It is a practical choice for large pools in moderate climates.
Check before you buy
- Confirm pool size is under 9,000 gallons
- Verify local temperatures stay within 5℉ to 109.4℉
- Ensure you can install required lightning protection
- Check electrical circuit capacity for the unit
- Plan for full winter drainage to prevent damage
The product at a glance
DOEL 44000 BTU Inverter Pool Heat Pump
Best for: pools up to 9,000 gallons needing heating and cooling
- Heating Capacity
- 44000 BTU
- Pool Capacity
- up to 9,000 gallons
- Voltage
- 220-240V
- Compressor Technology
- Full DC inverter
- Operational Modes
- Heating & Cooling
- COP Rating
- 15.8
View on Amazon: DOEL 44000 BTU Inverter Pool Heat Pump Affiliate link
This air-source heat pump provides 44,000 BTU of heating and active cooling for pools up to 9,000 gallons. A full DC inverter compressor delivers a COP rating up to 15.8. You can monitor performance via onboard LCD touch panel or Wi-Fi mobile app. It serves owners wanting dual-temperature control for fresh or saltwater setups.
Pros
- Delivers 44,000 BTU output with a maximum COP rating of 15.8
- Provides both heating up to 104°F and cooling down to 47°F
- Full DC inverter system operates as quiet as 53 dB at 1 meter
- Includes adapters for 1.25-inch and 1.5-inch hoses plus 1.5-inch PVC pipe
Cons
- Caps maximum pool capacity at 9,000 gallons
- Requires external lightning protection measures for outdoor placement
Good fit if
- You have a fresh or saltwater pool holding up to 9,000 gallons.
- You need both heating and chilling modes across varying seasons.
- You want wireless control and monitoring via a Wi-Fi mobile app.
Skip if
- You have a pool volume exceeding 9,000 gallons.
- You require water heating in ambient temperatures dropping below 5°F.
Verdict: DOEL 44,000 BTU Inverter Pool Heat Pump fits owners of pools up to 9,000 gallons who need quiet, reversible climate control with remote app access.
Specifications side by side
| Spec | DOEL 44000 BTU Inverter Pool Heat Pump |
|---|---|
| Heating Capacity | 44000 BTU |
| Pool Capacity | up to 9,000 gallons |
| Voltage | 220-240V |
| Compressor Technology | Full DC inverter |
| Operational Modes | Heating & Cooling |
| COP Rating | 15.8 |
| Connectivity | WiFi |
| Use | Poolside, Inground Pools |
| Height | 48" |
| Size | 14'*23'*48" |
| Model | CIP-13SE |
Frequently asked questions
Can this DOEL heat pump cool my pool?
Yes, the DOEL 44000 BTU Inverter Pool Heat Pump is a dual-mode unit. It provides both heating and cooling functions for year-round use. This feature allows you to maintain comfortable water temperatures regardless of the season. It suits owners who want smart climate control for their large pools.
What is the maximum pool size this heater supports?
This unit is designed for pools up to 9,000 gallons. The 44,000 BTU heating capacity ensures efficient warming for larger bodies of water. You can use it for both fresh water and salt water systems, provided the volume does not exceed this limit. It is ideal for inground pools.
Does the DOEL heater work in cold weather?
The unit operates within an ambient temperature range of 5℉ to 109.4℉. This range allows for use in various climates, though extreme cold may impact performance. The full DC inverter compressor helps deliver consistent temperatures. Check your local climate data to ensure it fits your seasonal needs.
How difficult is the plumbing connection for this unit?
Setup involves connecting the unit to your pool’s plumbing. The listing provides three connection options for compatibility. You can use a 1.25-inch or 1.5-inch hose adapter, a 1.5-inch adapter conversion kit, or a 1.5-inch PVC pipe converter. This variety helps you integrate the heater into your existing system.
What are the physical dimensions of the DOEL heat pump?
The unit measures 14 feet by 23 feet by 48 inches in height. It is designed for poolside or inground pool placement. The ABS casing resists aging and protects against sun and rain. These dimensions ensure it fits standard outdoor spaces while providing efficient heating and cooling.
Is this heater suitable for salt water pools?
Yes, the DOEL 44000 BTU Inverter Pool Heat Pump is suitable for salt water systems. You can use it for both fresh and salt water pools, as long as the volume is under 9,000 gallons. The durable ABS casing helps protect the unit from corrosion and weather exposure.