Spatender Floating Thermal Hot Tub Review: Specs, Pros and Cons

What stands out

• 3/8-inch thick closed-cell foam construction for durability
• 6' x 6' rectangular dimensions for wide coverage
• Traps heat at the surface to reduce evaporation
• Protects hard covers from harsh chemicals and gases
• Lightweight design that floats directly on the water

Who it fits

Key specs explained

Dimensions: 6' x 6'

This rectangular footprint covers a 72-inch by 72-inch area. You can place this blanket directly on the water surface of standard square spas. It offers a broad surface area to minimize heat escape from the top. Check your tub’s internal diameter to ensure the blanket sits flat without excessive overhang. This size suits many popular hot tub models found in the market.

Thickness: 3/8"

The foam layer is three-eighths of an inch thick. This specific depth provides a balance between insulation efficiency and buoyancy. Thinner blankets may compress too much, while thicker ones might be cumbersome. This thickness helps trap heat effectively at the water surface. It is a practical standard for floating covers that need to stay stable in the water.

Shell Material: Closed Cell Foam

Closed cell foam does not absorb water. This means the blanket will not become heavy or soggy after long-term use. It maintains its shape and insulating properties even when exposed to moisture. This material choice ensures durability against daily chemical exposure. It is a reliable option for users who want a low-maintenance cover that floats consistently.

Cover Type: Floating Thermal Hot Tub Blanket

This item is a thermal blanket that floats directly on the water. It works in conjunction with your existing hard cover or alone during warmer months. It reduces evaporation, which is a primary source of heat loss. You get a simple, passive insulation layer. This type of cover is ideal for supplementing your current heating strategy without adding mechanical complexity.

Design and build specs

According to the listing, this unit uses closed cell foam as its primary shell material. The foam is a high-density variant, which the manufacturer states helps protect your hard tub cover from chemical damage. This material choice means the blanket floats directly on the water. It acts as a barrier against harsh gases and evaporation that typically deteriorate standard covers. The construction is simple, with no complex mechanical parts or electronic controls to fail. You simply place it on the filled tub.

The dimensions are listed as 6 feet by 6 feet, or 72 inches by 72 inches. The shape is rectangular. This specific footprint is designed to fit most standard square spas. You can cut the material with scissors to ensure a perfect fit for your specific tub size. The color is cream. This neutral tone is practical for blending with various spa environments. The model is identified as 2021. The thickness is 3/8 inch. This layer provides insulation by trapping heat at the surface level. It reduces the energy needed to maintain water temperature. The product is intended for use in spas during both summer and winter. It serves as a lightweight alternative to heavy hard covers.

Setup And Everyday Use Guide

Setting up this Spatender floating thermal hot tub blanket is a straightforward process that requires minimal effort. You begin by placing the 6' x 6' rectangular foam sheet directly onto the surface of your filled hot tub. The listing indicates that you can trim the material with scissors to achieve a perfect fit for most standard square spas. This customization ensures the blanket sits securely on the water without gaps. Once positioned, the closed cell foam structure allows the unit to float steadily. This floating design is central to its everyday function. By resting on the water rather than covering it entirely, the blanket traps heat at the surface level. It significantly reduces evaporation, which is the primary cause of heat loss in spas. You can use this foam layer during the summer months to keep debris out of the tub while maintaining a pleasant appearance. In winter, it works alongside your hard cover to conserve energy. The 3/8-inch thickness provides a durable barrier against harsh chemicals and gases that typically deteriorate hard covers. This protective layer helps extend the life of your expensive spa cover by preventing direct contact with damaging elements. Daily use involves simply leaving the blanket in place. You do not need to remove it for regular maintenance unless you are performing a full clean. The cream-colored foam blends with most spa interiors. It serves as a constant insulating shield, reducing the workload on your heating system. This practical setup allows you to enjoy your spa with lower energy consumption and less frequent heating cycles. The simplicity of the design means you spend less time managing covers and more time using your hot tub.

Before You Buy This Blanket

You need to verify that your spa dimensions match the 6' x 6' rectangular footprint. This blanket sits directly on the water, so it works best with standard square or rectangular spas. It does not replace your existing hard cover. You should keep your heavy insulated cover in the garage for summer or extreme cold nights. The closed cell foam floats, which means you must remove it before draining the tub. Rinse the surface occasionally to remove debris or chemical residue. This product fits into the Hot Tubs & Spas category as a supplementary insulation layer. It reduces evaporation and protects your main cover from harsh gases. It is not a standalone heating solution. You will still need your primary cover for full thermal efficiency. Check your tub size carefully. Ensure the 72-inch by 72-inch sheet covers your water surface adequately. This simple foam sheet is an add-on, not a replacement for your existing spa infrastructure.

Check before you buy

• Measure your spa to ensure it matches the 6' x 6' rectangular size.
• Confirm you will keep your hard cover for extreme weather or summer use.
• Check that your spa is rectangular to fit the flat foam sheet properly.
• Plan to rinse the foam surface to remove chemical residue and debris.

The product at a glance

1

Spatender 6' x 6' Foam Floating Spa Blanket

Best for: Heat retention and hard cover protection

Cover Type

Floating Thermal Hot Tub Blanket

Shape

Rectangular

Dimensions

6' x 6'

Shell Material

Closed Cell Foam

Thickness

3/8"

Features

Pool Cover

View on Amazon: Spatender 6' x 6' Foam Floating Spa Blanket Affiliate link

The Spatender Floating Thermal Hot Tub Blanket is a 6' x 6' rectangular cover made from 3/8" thick closed cell foam. It floats on the water surface to reduce heat loss through evaporation and protect your hard cover from chemical damage. This cream-colored foam layer is durable and fits most standard hot tubs. It is a practical solution for maintaining water temperature and shielding your spa equipment.

Pros

• 3/8" thick closed cell foam construction
• 6' x 6' rectangular dimensions
• Reduces evaporation and heat loss
• Protects hard cover from chemicals

Cons

• Requires cutting to fit specific tub sizes
• No integrated locking mechanism
• Basic foam material lacks aesthetic appeal

Good fit if

• You want to reduce heating costs
• You need to protect your hard cover
• You prefer a simple floating solution

Skip if

• You need a rigid insulated cover
• You want a fixed size without cutting
• You prioritize visual aesthetics over function

Verdict: Spatender 6x6 Floating Thermal Blanket is a functional choice for users who prioritize heat retention and cover protection. It suits those willing to customize the fit for practical benefits.

Specifications side by side

Frequently asked questions

See also

• spatender floating thermal hot tub alternatives
• spatender vs cover valet cover
• empava tub review
• thermal grizzly aeronaut review