VEVOR Solar Pool Cover Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This vevor solar pool cover review focuses on the 36 x 18 ft rectangular model. It is a 12 mil thick solar blanket designed to trap heat and reduce evaporation. The cover measures 36 feet in length and 18 feet in width. It weighs 36 pounds and is made from durable polyethylene. This specific size suits large rectangular pools. The blue film uses tiny bubbles to absorb sunlight. You get a substantial sheet that can be trimmed to fit your exact pool dimensions. It aims to extend your swimming season by raising water temperatures significantly.
What stands out
- 12 mil thickness provides strong tear resistance and durability against sun exposure.
- Reduces water evaporation by up to 95%, conserving resources and heat.
- Increases water temperature by 8-15°C, depending on environmental conditions.
- Cuts down on cleaning needs by keeping leaves and dust out of the water.
Who it fits
Good fit for
You should choose this cover if you have a large rectangular pool measuring around 36 by 18 feet. The 12 mil thickness is ideal for owners who want durability without frequent replacements. It suits those looking to lower heating costs and extend their swimming season. The ability to cut the cover to fit makes it versatile for non-standard rectangular shapes. If you want to reduce evaporation and keep debris out with minimal effort, this spec sheet indicates a strong match for your setup.
Who should skip it
You should look elsewhere if your pool is not rectangular, as this cover is designed for rectangular shapes only. The fixed dimensions of 36 by 18 feet may not fit smaller or oddly shaped pools without excessive waste. If you need a cover that stays in place without trimming, this blank sheet requires manual cutting. It does not include a pump or heater, just the cover itself. Buyers seeking a pre-sized, ready-to-use solution for irregular pools will find this option impractical.
Verdict: This 36 x 18 ft solar cover offers solid heat retention and evaporation control for large rectangular pools. Its 12 mil thickness ensures durability, making it a practical choice for extending your swimming season.
Key specs for this cover
Thickness: 12 mil
This measurement indicates the durability of the polyethylene film. A 12 mil thickness offers a balance between flexibility and strength, allowing the cover to withstand daily use without tearing easily. It provides sufficient insulation to retain heat while remaining easy to handle. When shopping for pool covers, you can compare this to thinner 6 mil options, which are less durable, or thicker 16 mil versions, which offer more longevity but are heavier and stiffer. This spec helps you choose based on your expected usage frequency.
Dimensions: 36 x 18 ft
These dimensions define the coverage area for rectangular pools. This size is designed to fit pools of similar proportions, ensuring complete surface coverage to maximize heat retention and reduce evaporation. You should verify your pool's actual measurements before purchasing, as a cover that is too small will leave gaps, while one that is too large will require trimming. This specific size suits medium-sized residential inground or above-ground pools. Always allow for slight overhang to ensure secure placement around the pool edge.
Cover Type: Solar pool cover
This type of cover is designed specifically to absorb sunlight and transfer heat to the water. Unlike clear vinyl covers that primarily keep debris out, solar covers feature bubble structures that trap solar energy. This helps raise water temperatures by several degrees, extending your swimming season. It also significantly reduces water evaporation, which conserves water and reduces the need for refilling. This spec is crucial if your primary goal is to warm the pool naturally without relying solely on mechanical heaters.
Shape: Rectangle
This specification confirms the geometric form of the cover, which is essential for proper fitment. Rectangular covers are standard for most residential pools and are designed to lay flat across the water surface. This shape ensures even distribution of weight and heat absorption. If you have a freeform or circular pool, this item will not fit without extensive cutting, which may compromise its structural integrity. You should only select this shape if your pool has straight sides and right-angle corners for a secure and effective seal.
Design and Build Details
The listing specifies a 12 mil polyethylene construction. This thickness determines how the material behaves in your pool environment. A 12 mil film offers a practical balance between flexibility and tear resistance. You can expect the cover to withstand daily handling and sun exposure without warping. The material is blue, which helps absorb solar energy during the day. This color choice is standard for solar covers aiming to raise water temperature.
The dimensions are listed as 36 feet by 18 feet. This rectangular layout is designed for standard inground or above-ground pools of that footprint. The listing notes the cover can be cut to fit other shapes. This means you can trim the excess material to match your pool’s exact perimeter. The weight is 36 pounds. This mass suggests the cover is substantial enough to stay in place but manageable for one person to handle.
According to the listing, the cover type is a solar pool cover. It uses thousands of tiny bubbles to trap heat and reduce evaporation. The design focuses on insulation and durability rather than complex controls. There are no remote controls or digital displays involved. You simply lay the cover over the water. The finish is smooth polyethylene, which resists fading under intense sun. This build supports a longer swimming season by retaining warmth and keeping debris out.
Setup And Daily Use Guide
This VEVOR solar pool cover is a large 36 x 18 ft rectangle. Its substantial size means it requires a pool of matching dimensions. The listing notes you can cut the material to fit any shape. This allows you to customize the fit for non-standard pools. The cover weighs 36 pounds. You will need to handle this weight when placing it on the water or removing it for storage. The 12 mil thickness provides durability. It resists tearing and fading under sun exposure. This thickness also helps the cover withstand daily handling. The blue color helps absorb heat. It traps warmth during the day and reduces heat loss at night. This can raise water temperature by 8-15°C. The bubble structure prevents up to 95% of evaporation. This saves water and reduces the need for frequent refilling. The thick PE material acts as an insulator. It keeps leaves and dust out of the pool. This lowers cleaning costs and maintenance time. You spend less time scrubbing and more time swimming. The cover works with both inground and above ground pools. It is designed for poolside use. The customizable fit ensures comprehensive coverage. You can trim the edges to match your pool’s exact shape. This provides a secure seal over the water surface. The durable construction ensures it lasts through the swimming season. It withstands intense sun without warping. This makes it a practical choice for extending your swimming season. You enjoy warmer water for longer. The reduced evaporation helps maintain water levels. This simplifies your daily pool care routine.
Before You Buy This Cover
You need to verify your pool dimensions match the 36 by 18 feet size. The listing allows you to cut the material, so measure carefully before ordering. You will likely need a pool cover pump to remove rainwater. Standing water blocks sunlight and reduces heating efficiency. Keep a repair kit nearby for accidental tears. The 12 mil polyethylene film is durable but can degrade under intense UV exposure over time. Store it properly when not in use. This solar blanket fits alongside other heating options in the Hot Tubs & Spas category. It works best as a primary heat source during sunny days. You can pair it with a standard electric heater for cloudy periods or night use. Check if your existing cover fits your pump system. Ensure you have storage space for the large sheet when folded. This product suits owners who want to extend their swimming season without major energy costs.
Check before you buy
- Measure your pool to ensure it fits the 36 by 18 feet dimensions.
- Buy a pool cover pump to remove rainwater and improve heating.
- Check if you have adequate storage space for the large folded cover.
- Verify your pool shape allows for cutting the rectangular material to fit.
- Consider pairing this solar cover with an electric heater for cloudy days.
The product at a glance
VEVOR 36 x 18 ft Rectangle Solar Pool Cover
Best for: Large rectangular pools needing heat retention
- Cover Type
- Solar pool cover
- Shape
- Rectangle
- Dimensions
- 36 x 18 ft
- Thickness
- 12 mil
- Use
- Poolside, Inground Pools
- Weight
- 36 pounds
View on Amazon: VEVOR 36 x 18 ft Rectangle Solar Pool Cover Affiliate link
This VEVOR solar cover measures 36 by 18 feet with 12 mil thick PE material. It uses bubble film to reduce evaporation by up to 95% and raise water temperature by 8-15°C. The blue rectangular design fits inground or aboveground pools. You can cut it to fit custom shapes. It weighs 36 pounds and resists sun exposure without fading.
Pros
- 12 mil thick PE material for durability
- Reduces water evaporation by up to 95%
- Raises water temperature by 8-15°C
- Customizable fit for various pool shapes
- Keeps leaves and dust out of the pool
Cons
- Large 36 x 18 ft size may not fit smaller pools
- No remote or app control for automation
- Heavy at 36 pounds for manual handling
Good fit if
- You have a large rectangular pool near 36 x 18 feet
- You want to extend your swimming season with heat retention
- You need to reduce water evaporation and cleaning costs
Skip if
- You have a small pool under 24 x 12 feet
- You prefer a circular or oval pool shape
- You need an automated cover system
Verdict: VEVOR 36 x 18 ft Solar Pool Cover is ideal for owners of large rectangular pools seeking to retain heat and reduce water loss. It suits those who value manual durability and customizable sizing over automated features.
Specifications side by side
| Spec | VEVOR 36 x 18 ft Rectangle Solar Pool Cover |
|---|---|
| Cover Type | Solar pool cover |
| Shape | Rectangle |
| Dimensions | 36 x 18 ft |
| Thickness | 12 mil |
| Features | Pool Cover |
| Use | Poolside, Inground Pools |
| Weight | 36 pounds |
| Size | 36' x 18' Rectangle (12 Mil) |
| Color | Blue |
| Model | pool cover 300-36*18 |
Frequently asked questions
Does the VEVOR 36 x 18 ft solar pool cover fit standard rectangular pools?
Yes, it is designed for large rectangular pools. The dimensions are 36 feet by 18 feet. You can cut the material to customize the fit for non-standard shapes. This ensures you get a proper seal over your specific pool size.
How thick is the VEVOR solar pool cover material?
The cover has a thickness of 12 mil. This measurement indicates the durability of the polyethylene film. A 12 mil thickness offers a balance between flexibility and strength. It allows the cover to withstand daily use without tearing easily while providing insulation.
What color is the VEVOR solar pool cover?
The listing specifies the color as blue. This is the standard color for solar pool covers to maximize heat absorption. The blue surface helps trap solar energy to warm your pool water while reducing evaporation and chemical loss.
How much does the VEVOR 36 x 18 ft solar pool cover weigh?
The cover weighs 36 pounds. This weight reflects the density of the 12 mil polyethylene material. The substantial weight helps keep the cover in place during light winds. You should handle it with care during installation and removal.
Is the VEVOR solar pool cover suitable for inground pools?
Yes, it is suitable for inground pools. The product attributes list use cases as poolside and inground pools. Its large rectangular design makes it ideal for owners of large inground pools seeking to retain heat and reduce water loss effectively.
Can I cut the VEVOR solar pool cover to fit my pool?
Yes, the listing allows you to cut the material. This feature lets you customize the fit for non-standard pool shapes. You should measure your pool carefully before ordering. Cutting ensures a precise fit that minimizes heat loss and evaporation around the edges.
What is the primary function of the VEVOR solar pool cover?
Its primary function is heat retention and evaporation reduction. The 12 mil thick solar blanket traps heat from the sun. This helps maintain warmer water temperatures. It also reduces water loss and chemical usage by covering the pool surface when not in use.
